FREE UK Delivery on orders over £20

click to see all products by Lamy

Lamy Z50 nib

Lamy Z50 nib black broad B
sorry, out of stock
Special Offer
Genuine Lamy steel nibs that are direct replacements for the Accent (95 and 97), scala, Studio (65 and 67), cp1, alu, linea, ST, Joy, Al-Star, Safari, Vista, Smile, abc and other models that are fitted with a standard Lamy steel nib. They will also fit all Lamy pens that come with gold nibs with the exception of the 2000 fountain pen.

Both plain steel-coloured and black versions are available but we may supply a steel coloured nib in place of a black one if supplies are low so please let us know if this will not be acceptable. Note that the italic nibs (1.1mm, 1.5mm and 1.9mm) are available in plain steel finish only. Note: Lamy nibs are factory tested so you will notice some evidence of ink even though all our nibs are brand new and never used.

Lamy has recently discontinued the MK nib but the current M (medium) nib is made to the old MK specification. The "A" nib is the grade supplied as standard on the abc child's fountain pen and is between fine and medium.

Lamy nib replacement is quite straightforward if you follow this procedure:

  1. clean and dry the pen
  2. take a piece of Sellotape 50-60mm long and stick it across the nib, ie at right-angles to the axis of the pen, with the middle of the piece of tape on top of the nib. Make sure the tape only sticks to the nib, not any other part of the pen.
  3. hold the pen in your left hand with the nib horizontal and facing to the right and the tape hanging down either side.
  4. put your right index finger under the nib and grip the tape around that finger by using your thumb and middle finger.
  5. pull the tape away from the pen, applying gentle downwards pressure to ensure the tape stays stuck to the nib. The tape will grip the nib and slide it off the feed (black plastic part).
  6. slide the replacement nib on by hand, making sure it goes all the way to the end (it will be quite stiff but you shouldn't use any tool).

If you are left-handed, just replace "right" with "left" and vice-versa.

Note: on rare occasions the nib and feed will come out together. Don't worry of this happens, just continue to remove the nib before replacing the feed in the barrel of the pen. When replacing the feed, look inside the barrel and you will see a little channel formed by 2 ribs. The rib on the underside of the feed slides into this channel.

Image for illustrative purposes only. Each nib is marked with the point size (eg F for fine, M for medium etc).